Reasons why the USB data cable is hard

When the USB data cable is used for a while, it will become harder. What is the reason why the USB data cable is hard? How should it be solved? USB data cable wholesale manufacturers take you to know.

First, the reason why the USB data cable is hardened is that the plastic material caused by oxidation, grease corrosion, etc. is aging. The outer protective layer of the USB data cable is mostly rubber products. The rubber product itself will change due to the difference in temperature, but the state after this change is not long-lasting, and generally it will return to normal as the temperature returns to normal. For a thin layer of rubber on the USB data cable, if it is oxidized and the grease is corroded, it will harden to a different extent and cannot be recovered.

Second, slow down the USB data cable tough solution

  
1, try to avoid use in high temperature and low temperature environment, can delay aging to some extent;

  
2, do not go around the hand, sweat will corrode the line, causing the line to become hard until it is disconnected;

  
3, do not touch acid, alkali liquid, especially sweat, including beverages;

  
4, do not have severe temperature differences, such as when winter comes out of the air-conditioned room……

  
5, do not wrap the usb data cable on the machine too tight;

  
6, USB data cable can be hung on mobile phones, computers, please remove when not in use;

  
7. When not in use, it should be placed in a place where it is protected from direct sunlight. It is best to dry and ventilate the place.